|本期目录/Table of Contents|

[1]王秋东,吉伯海,傅中秋.考虑附加孔效应的带止裂孔裂纹钢板补强效果[J].南京工业大学学报(自然科学版),2019,41(03):370-375.[doi:10.3969/j.issn.1671-7627.2019.03.015]
 WANG Qiudong,JI Bohai,FU Zhongqiu.Effects of bonding steel plate strengthening on cracked steel plates repaired by stop holes and additional ones[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2019,41(03):370-375.[doi:10.3969/j.issn.1671-7627.2019.03.015]
点击复制

考虑附加孔效应的带止裂孔裂纹钢板补强效果()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
41
期数:
2019年03期
页码:
370-375
栏目:
出版日期:
2019-05-28

文章信息/Info

Title:
Effects of bonding steel plate strengthening on cracked steel plates repaired by stop holes and additional ones
文章编号:
1671-7627(2019)03-0370-06
作者:
王秋东吉伯海傅中秋
河海大学 土木与交通学院,江苏 南京 210098
Author(s):
WANG Qiudong JI Bohai FU Zhongqiu
College of Civil and Transportation Engineering, Hohai University, Nanjing 210098, China
关键词:
钢结构 疲劳裂纹 附加孔 钢板补强 应力分布
Keywords:
steel structure fatigue crack additional hole steel plate strengthening stress distribution
分类号:
O343;U441
DOI:
10.3969/j.issn.1671-7627.2019.03.015
文献标志码:
A
摘要:
为进一步提升止裂孔的止裂效果,研究了附加孔及补强钢板组合作用下的钻孔止裂性能。通过建立带裂纹的1/4钻孔止裂模型,对比了不同附加孔角度、附加孔间距对止裂孔边应力分布的影响。在此基础上,分析了在附加孔的基础上粘贴补强钢板的可行性,并进一步研究了不同补强钢板布置形式、不同补强钢板厚度对钻孔止裂效果的影响。研究结果表明,附加孔角度为90°时对钻孔止裂效果的提升作用最明显。随着附加孔间距的降低,止裂孔边应力极值逐渐减小,但会逐渐产生新的应力集中区域。在附加孔的基础上粘贴补强钢板时宜确保补强钢板边缘与止裂孔、附加孔相切,且补强钢板的厚度宜为待补强钢板厚度的一半。
Abstract:
To improve the repairing effect of stop holes, crack-arresting properties retrofitted by both additional holes and bonded steel plates were analyzed. A 1/4 model simulating the cracked steel plate repaired by stop holes was developed, and the effect of the angle and the distance of additional holes on the stress distribution around the edge of the stop hole were analyzed. The feasibility of bonding steel plate strengthening based on additional holes was investigated, and the effect of different arrangement forms and plate thicknesses of bonded steel plate on the effectiveness of stop holes were also considered. Results showed that the optimal angle of additional holes was 90°. With the decrease of the distance of additional holes, the maximum stress around the edge of stop holes decreased gradually. However, the new stress concentration would be induced thereby. The bonded steel plate was suggested to be tangent to the inner side of stop holes and additional holes, and its thickness was recommended to be half of the cracked steel plate.

参考文献/References:

[1] 傅中秋,吉伯海,王满满,等.钢桥面板疲劳热点应力计算模型精度分析[J].南京工业大学学报(自然科学版),2016,38(1):83.
[2] GUO T,LI A Q,WANG H.Influence of ambient temperature on the fatigue damage of welded bridge decks[J].International Journal of Fatigue,2008,30(6):1092.
[3] JI B H,LIU R,CHEN C,et al.Evaluation on root-deck fatigue of orthotropic steel bridge deck[J].Journal of Constructional Steel Research,2013,90(5):174.
[4] PARK H C,LEE C H,CHANG K H.Strengthening a damaged steel girder bridge by the replacement repair welding[J].KSCE Journal of Civil Engineering,2012,16(7):1243.
[5] MAO D J,LIU F C.Comprehensive evaluation on effects of strengthened by bonding steel plate or CFRP based on analytic hierarchy process[J].Advanced Materials Research,2014,919:2037.
[6] ZHI Y Z,JI B,FU Z,et al.Fatigue performance of cracked rib-deck welded joint retrofitted by ICR technique[J].International Journal of Steel Structures,2016,16(3):735.
[7] FU Z Q,JI B H,XIE S H,et al.Crack stop holes in steel bridge decks:drilling method and effects[J].Journal of Central South University,2017,24(10):2372.
[8] FANNI M,FOUDA N,SHABARA M A N,et al.New crack stop hole shape using structural optimizing technique[J].Ain Shams Engineering Journal,2015,6(3):987.
[9] 袁周致远,吉伯海,傅中秋.钢结构疲劳裂纹合理止裂孔形状研究[J].南京理工大学学报(自然科学版),2017,41(5):556.
[10] CHOI J H,KIM D H.Stress characteristics and fatigue crack behavior of the longitudinal rib-to-cross beam joints in an orthotropic steel deck[J].Advances in Structural Engineering,2008,11(2):189.
[11] MURDANI A,MAKABE C,SAIMOTO A,et al.Stress concentration at stop-drilled holes and additional holes[J].Engineering Failure Analysis,2008,15(7):810.
[12] ISHIKAWA T,MATSUMOTO R,HATTORI A,et al.Reduction of stress concentration at edge of stop hole by closing crack surface[J].Journal of the Society of Materials Science,2013,62(1):33.
[13] 伍希志,林彬,程军圣,等.裂纹钢板的止裂孔与CFRP加固及其疲劳寿命预测[J].天津大学学报(自然科学与工程技术版),2017,50(2):154.

相似文献/References:

[1]宋玮,董军,王琪,等.绵竹市典型震损底框房屋钢结构快速加固关键问题[J].南京工业大学学报(自然科学版),2009,31(01):66.
 SONG Wei,DONG Jun,WANG Qi,et al.Key problems of rapidly strengthening of steel structure for earthquake damaged multistory masonry buildings with bottomframe in Mianzhu City[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2009,31(03):66.
[2]郑廷银.钢结构设计方法的研究进展与展望[J].南京工业大学学报(自然科学版),2003,25(05):101.[doi:10.3969/j.issn.1671-7627.2003.05.025]
[3]杜咏,李国强.火灾非均匀温度场中正放四角锥网架结构的临界温度[J].南京工业大学学报(自然科学版),2008,30(06):27.[doi:10.3969/j.issn.1671-7627.2008.06.007]
 DU Yong,LI Guo-qiang.Critical temperature of regular pyramidic space truss in non-uniform fire temperature field[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2008,30(03):27.[doi:10.3969/j.issn.1671-7627.2008.06.007]
[4]王宝家,殷晨波,戈文思,等.造船门式起重机上支承铰裂纹扩展分析[J].南京工业大学学报(自然科学版),2014,36(06):88.[doi:10.3969/j.issn.1671-7627.2014.06.016]
 WANG Baojia,YIN Chenbo,GE Wensi,et al.Crack propagation analysis on shipbuilding gantry crane bearing hinge[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2014,36(03):88.[doi:10.3969/j.issn.1671-7627.2014.06.016]

备注/Memo

备注/Memo:
收稿日期:2018-01-02
基金项目:国家自然科学基金(51678216)
作者简介:王秋东(1993—),男,E-mail: hhuqdwang@hhu.edu.cn; 吉伯海(联系人),教授,E-mail: hhbhji@163.com.
引用本文:王秋东,吉伯海,傅中秋.考虑附加孔效应的带止裂孔裂纹钢板补强效果[J].南京工业大学学报(自然科学版),2019,41(3):370-375..
更新日期/Last Update: 2019-05-30