|本期目录/Table of Contents|

[1]张梦园,顾伯勤,陶家辉.密封材料工业纯钛TA2中低温压缩蠕变行为[J].南京工业大学学报(自然科学版),2018,40(06):56-62.[doi:10.3969/j.issn.1671-7627.2018.06.009]
 ZHANG Mengyuan,GU Boqin,TAO Jiahui.Compression creep behavior of commercial pure titanium TA2 for sealing material at low temperatures[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2018,40(06):56-62.[doi:10.3969/j.issn.1671-7627.2018.06.009]
点击复制

密封材料工业纯钛TA2中低温压缩蠕变行为()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
40
期数:
2018年06期
页码:
56-62
栏目:
出版日期:
2018-11-20

文章信息/Info

Title:
Compression creep behavior of commercial pure titanium TA2 for sealing material at low temperatures
文章编号:
1671-7627(2018)06-0056-07
作者:
张梦园顾伯勤陶家辉
南京工业大学 机械与动力工程学院,江苏 南京 211800
Author(s):
ZHANG MengyuanGU BoqinTAO Jiahui
College of Mechanical and Engineering,Nanjing Tech University,Nanjing 211800,China
关键词:
TA2压缩蠕变 蠕变激活能 幂律方程 瞬时蠕变 稳态蠕变
Keywords:
compressive creep of TA2 creep activation energy power law equation transient creep steady state creep
分类号:
TG146
DOI:
10.3969/j.issn.1671-7627.2018.06.009
文献标志码:
A
摘要:
对工业纯钛TA2在不同温度以及不同压力下进行压缩蠕变实验,分析了工业纯钛TA2压缩稳态蠕变以及压缩瞬时蠕变行为,研究发现工业纯钛TA2在低温低应力条件下存在蠕变饱和现象。通过对蠕变数据分析计算得到TA2在353~523 K之间的蠕变激活能Qc=30 kJ/mol,且稳态蠕变速率s与应力σ之间满足幂律方程; 运用一级动力学反应理论求得不同条件下工业纯钛TA2压缩瞬时蠕变参数,并建立了瞬时蠕变参数与稳态蠕变速率的关系。
Abstract:
Compressive transient and steady state creep of commercial pure titanium TA2 was analyzed in the different temperature and stresses in the frame work of first order reaction kinetics.It was found that commercial pure titanium TA2 had creep saturation at low temperatures and stresses.The creep activation energy of Qc=30 kJ/mol between 353-523 K was obtained through the analysis of the creep data,and the power law equation was satisfied between steady state creep rate s and stress σ.Various transient creep parameters with steady state creep rate by first order reaction rate theory was obtained,and good correlation of transient creep parameters with steady state creep rate was obtained under the test conditions.

参考文献/References:

[1] 王彦皓,雷杨,武超.石油行业钛材的应用现状及展望[J].中国石油石化,2016(14):99.
[2] 伍俐,付天琳,于晓华,等.工业纯钛的阳极氧化特性及其抗腐蚀性能研究[J].热加工工艺,2017(4):161.
[3] 陈圆.高温蠕变对金属与金属接触型螺栓法兰接头密封性能影响[D].上海:华东理工大学,2016.
[4] ADENSTEDT H K.Creep of titanium at room temperature[J].Metal progress,1949,56:258.
[5] 马秋林,张莉,徐宏,等.工业纯钛TA2室温蠕变第1阶段特性研究[J].稀有金属材料与工程,2007,36(1):11.
[6] 张莉,徐宏,马秋林,等.工业纯钛TA2的低温蠕变行为[J].稀有金属材料与工程,2008,37(12):2114.
[7] 常乐,周昌玉,彭剑,等.工业纯钛TA2中低温蠕变特征研究[J].稀有金属材料与工程,2017(6):1463.
[8] 彭剑,周昌玉,代巧,等.工业纯钛中低温蠕变的等时应力应变曲线[J].稀有金属材料与工程,2016,45(2):346.
[9] 王孔探.TC4钛合金在200℃时的蠕变持久特性[J].稀有金属材料与工程,1998(2):84.
[10] TOBOLOVA Z,CADEK J.An interpretation of steady state creep[J].Philosophical magazine,1979,26:1819.
[11] DOWLING N E.Mechanical behavior of material:engineering methods for deformation,fracture and fatigue[M].New Jersey:Prentice Hall,1993.
[12] WEBSTER G A,COX A P D,DORN J E.A Relationship between transient and steady-state creep at elevated temperatures[J].Metal science,1969,3(3):221.
[13] EVANS W,WILSHIRE B.Work-hardening and recovery during transient and steady-state creep[J].Metal science,1968,242:2514.
[14] PHANIRAJ C,CHOUDHARY B K,RAJ B,et al.A critical damage criterion for creeping solids[J].Journal of materials science,2005,40(9/10):2561.
[15] BOEHLERT C J,MIRACLE D B.The creep behavior of Ti-Al-Nb O+bcc orthorhombic alloys[J].Metallurgical & materials transactions A(physical metallurgy and material science),1999,30(9):2349.
[16] HAYES R W.Minimum strain rate and primary transient creep analysis of a fine structure orthorhombic titanium aluminide[J].Scripta materialia,1996,34(6):1005.
[17] PHANIRAJ C,NANDAGOPAL M,MANNAN S L,et al.The relationship between transient and steady state creep in AISI 304 stainless steel[J].Acta Metallurgica et Materialia,1991,39(7):1651.
[18] SATYANARAYANA D V V,MALAKONDAIAH G,PHANIRAJ C,et al.First order reaction kinetics for transient creep in NiAl hardened austenitic steel[J].Materials science & technology,2013,25(8):953.
[19] GOLLAPUDI S,SATYANARAYANA D V V,PHANIRAJ C,et al.Transient creep in titanium alloys:effect of stress,temperature and trace element concentration[J].Materials science & engineering A,2012,556(11):510.
[20] WILSHIRE B,OWEN D R J.Creep and fracture of engineering materials and structures[M].New Jersey:Pineridge Press,1981.
[21] MOHAMED F A.The role of impurities during creep and superplasticity at very low stresses[J].Metallurgical & materials transactions A,2002,33(2):261.

备注/Memo

备注/Memo:
收稿日期:2017-10-23
基金项目:国家自然科学基金(51375223,51375247)
作者简介:张梦园(1992—),女,江苏宿迁人,硕士,主要研究方向为工业纯钛TA2蠕变性能以及预测方法; 顾伯勤(联系人),教授,E-mail: bqgu@njtech.edu.cn.
引用本文:张梦园,顾伯勤,陶家辉.密封材料工业纯钛TA2中低温压缩蠕变行为[J].南京工业大学学报(自然科学版),2018,40(6):56-62..
更新日期/Last Update: 2018-11-30