|本期目录/Table of Contents|

[1]吴伟伟,黄筱调,方成刚,等.水泥3D打印喷头内浆体流动的MRT-LBM分析[J].南京工业大学学报(自然科学版),2018,40(05):79-84.[doi:10.3969/j.issn.1671-7627.2018.05.013]
 WU Weiwei,HUANG Xiaodiao,FANG Chenggang,et al.Multiple-relaxation-time lattice Boltzmann method analyses for paste flow in cement-3D printing extruder[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2018,40(05):79-84.[doi:10.3969/j.issn.1671-7627.2018.05.013]
点击复制

水泥3D打印喷头内浆体流动的MRT-LBM分析()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
40
期数:
2018年05期
页码:
79-84
栏目:
出版日期:
2018-09-20

文章信息/Info

Title:
Multiple-relaxation-time lattice Boltzmann method analyses for paste flow in cement-3D printing extruder
文章编号:
1671-7627(2018)05-0079-06
作者:
吴伟伟黄筱调方成刚李媛媛
南京工业大学 机械与动力工程学院,江苏省工业装备数字制造及控制技术重点实验室,江苏 南京 211800
Author(s):
WU WeiweiHUANG XiaodiaoFANG ChenggangLI Yuanyuan
Jiangsu Key Laboratory of Digital Manufacturing for Industrial Equipment and Control Technology, College of Mechanical and Power Engineering,Nanjing Tech University,Nanjing 211800,China
关键词:
水泥3D打印 Herschel-Bulkley流体 多松弛时间的LBM 数值模拟 流线 速度分布
Keywords:
cement-3D printing Herschel-Bulkley fluid multiple-relaxation-time lattice Boltzmann method numerical simulation streamlines velocity distributions
分类号:
TH12
DOI:
10.3969/j.issn.1671-7627.2018.05.013
文献标志码:
A
摘要:
水泥3D打印时,水泥浆体在喷头内的流动性对挤出成型有重要影响。以水泥、水、聚羧酸减水剂、改性棒土和纤维素醚作为原始打印材料,根据流变特性测试,采用Herschel-Bulkley模型作为水泥浆体的流变模型,并利用多松弛时间的格子Boltzmann方法(MRT-LBM)对浆体在喷头中的流动进行了分析,引入矩函数来描述松弛过程中的碰撞步,并利用泊肃叶流的理论解对MRT模型进行了验证。在进行实际仿真时,以雷诺数作为准则进行物理单位和格子单位之间的转换,获得相关的流线图和速度场分布图。结果表明:水泥浆体在螺槽截面的流动呈现环流形状,环流的中心在(0.5W,0.7h)位置处; 根据速度场的分布,在螺槽横截面的左下角和右下角不存在流体流动,适当增大螺杆速度或螺槽宽度有助于水泥浆体在螺槽内的有效输送。
Abstract:
The flow of the cement paste in the extruder has an important effect on the extruding in the cement-3D printing.The flow of the cement paste in the extruder was analyzed with the multiple-relaxation-time lattice Boltzmann method(MRT-LBM),in which the original printing materials were cement,water,polycarboxylate superplasticizer,modified attapulgite and cellulose ether,and Herschel-Bulkley model was taken as the rheological model of the cement paste in the rheological test.The moment function was introduced to express the relaxation process in the collision step.MRT-LBM was validated by the theoretical solution of the Poiseuille flow.When it was applied into the cement paste in the extruder,the units of the corresponding physical quantities were converted by taking Reynolds number as the similarity criterion,and the streamlines and the velocity distributions along different directions could be obtained.Results showed that the flow of the cement paste in the extruder section was an annular shape.The center was at position of(0.5W,0.7h).According to the velocity distributions,there was no flow at the left bottom and right bottom of the section.Increasing the rotation speed or widening the screw properly contributed to the more effective transport of the cement paste.

参考文献/References:

[1] BUICK J M,COSGROVE J A.Numerical simulation of the flow field in the mixing section of a screw extruder by the lattice Boltzmann model[J].Chemical engineering science,2006,61(10):3323.
[2] BUICK J M.Lattice Boltzmann simulation of power-law fluid flow in the mixing section of a single-screw extruder[J].Chemical engineering science,2009,64(1):52.
[3] MENDU S S,DAS P K.Flow of power-law fluids in a cavity driven by the motion of two facing lids-A simulation by lattice Boltzmann method[J].Journal of non-Newtonian fluid mechanics,2012(175/176):10.
[4] CHAI Z,SHI B,GUO Z,et al.Multiple-relaxation-time lattice Boltzmann model for generalized Newtonian fluid flows[J].Journal of non-Newtonian fluid mechanics,2011,166(5):332.
[5] MOHMAD A A.Lattice Boltzmann method:fundamentals and engineering applications with computer codes[M].Berlin:Springer Science & Business Media,2011.
[6] 李凌丰,刘际轩,茅旭飞.螺杆加工塑料时熔体流动的数值模拟[J].机械工程学报,2011,47(24):50.
[7] CRUZ D O A,PINHO F T.Analysis of isothermal flow of a Phan-Thien-Tanner fluid in a simplified model of a single-screw extruder[J].Journal of non-Newtonian fluid mechanics,2012,167:95.
[8] 刘泉声,卢超波,刘滨,等.考虑温度及水化时间效应的水泥浆液流变特性研究[J].岩石力学与工程学报,2014,33:3730.
[9] NEOFYTOU P.A 3rd order upwind finite volume method for generalised Newtonian fluid flows[J].Advances in engineering software,2005,36(10):664.
[10] MITSOULIS E.Flows of viscoplastic materials:models and computations[J].Rheology reviews,2007,2007:135.
[11] PAPANASTASIOU T C,BOUDOUVIS A G.Flows of viscoplastic materials:models and computations [J].Computers and structures,1997,64(1):677.
[12] ALEXANDROU A,MCGILVREAY T,BURGOS G.Steady Herschel-Bulkley fluid flow in three-dimensional expansions[J].Journal of non-Newtonian fluid mechanics,2001,100(1):77.
[13] SASTROHARTONO T,JALURIA Y,ESSEGHIR M,et al.A numerical and experimental study of three-dimensional transport in the channel of an extruder for polymeric materials[J].International journal of heat mass transfer,1995,38(11):1957.
[14] 徐百平,瞿金平,刘跃军,等.单螺杆挤出机中三维流动有限体积数值模拟[J].化工学报,2008,59(12):3055.
[15] 郭照立.格子Boltzmann方法的原理及应用[M].北京:科学出版社,2009.
[16] 何雅玲,王勇,李庆.格子Boltzmann方法的理论及应用[M].北京:科学出版社,2009.

备注/Memo

备注/Memo:
收稿日期:2017-05-17
作者简介:吴伟伟(1991—),男,江苏盐城人,博士,主要研究方向为增材制造; 黄筱调(联系人),教授,E-mail:njtechhxd@126.com.
引用本文:吴伟伟,黄筱调,方成刚,等.水泥3D打印喷头内浆体流动的MRT-LBM分析[J].南京工业大学学报(自然科学版),2018,40(5):79-84..
更新日期/Last Update: 2018-09-30