|本期目录/Table of Contents|

[1]郑杨艳,杨思晟,凌祥.服役材料寿命预测的小冲孔蠕变试验研究[J].南京工业大学学报(自然科学版),2017,39(03):11-15.[doi:10.3969/j.issn.1671-7627.2017.03.003]
 ZHENG Yangyan,YANG Sishen,LING Xiang.Creep life prediction of in-service materials by small punch creep test[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2017,39(03):11-15.[doi:10.3969/j.issn.1671-7627.2017.03.003]
点击复制

服役材料寿命预测的小冲孔蠕变试验研究()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
39
期数:
2017年03期
页码:
11-15
栏目:
出版日期:
2017-05-20

文章信息/Info

Title:
Creep life prediction of in-service materials by small punch creep test
文章编号:
1671-7627(2017)03-0011-05
作者:
郑杨艳12杨思晟1凌祥1
1. 南京工业大学 机械与动力工程学院,江苏 南京 211800; 2. 江苏省特种设备安全监督检验研究院,江苏 南京 210036
Author(s):
ZHENG Yangyan12YANG Sishen1LING Xiang1
1. College of Mechanical and Power Engineering,Nanjing Tech University,Nanjing 211800,China; 2. Jiangsu Special Equipment Safety Supervision Inspection Institute of Jiangsu,Nanjing 210036,China
关键词:
蠕变 小冲孔试验 寿命预测
Keywords:
creep small punch test life prediction
分类号:
TG113.25
DOI:
10.3969/j.issn.1671-7627.2017.03.003
文献标志码:
A
摘要:
为了尝试将小冲孔试验技术应用于服役设备寿命预测,对服役后的Cr5Mo以及12Cr1MoV进行不同载荷下的小冲孔蠕变试验,与常规单轴蠕变试验结果比对,建立了服役材料的小冲孔蠕变寿命分析方法。分析结果表明:高温、恒载下小冲孔曲线存在明显的蠕变减速、恒速、加速阶段,小冲孔试验具有替代传统蠕变试验的能力。随着载荷的增大,小冲孔稳态蠕变速率不断增加,而蠕变断裂时间则逐渐缩短。稳态蠕变速率与载荷之间可以使用Norton方程表示,而断裂寿命则与小冲孔载荷之间则存在幂函数关系。基于Larson-Miller法,建立蠕变断裂寿命与温度、载荷之间的参数化关系从而实现基于小冲孔试验的服役材料蠕变寿命外推。
Abstract:
Creep properties of in-service Cr5Mo and 12Cr1MoV under different loads were analyzed by small punch creep tests.Compared to the results of conventional creep tests,creep life prediction method based on small punch test was established.Results showed that there existed apparent stages of deceleration,constant speed and acceleration in the small punch creep curves,which had the ability to replace the traditional creep tests.The steady creep rate gradually increased while the rupture life decreased with the increase of load.The relationship between steady creep rate and load could be described by Norton equation.Meanwhile,there was a power function relation between rupture life and load under constant temperature.In order to realize life extrapolation for in-service materials by small punch test,the creep rupture time was analyzed by temperature and load based on the Larson-Miller equation.

参考文献/References:

[1] 凌祥,周志祥,解巧云.小冲孔试验技术研究及其应用[J].南京工业大学学报(自然科学版),2009,31(2):106.
[2] MANAHAN M,ARGON A,HARLING O.The development of a miniaturized disk bend test for the determination of postirradiation mechanical properties[J].Journal of nuclear materials,1981,103:1545.
[3] HUANG F H,HAMILTON M L,WIRE G L.Bend testing for miniature disks[J].Nuclear technoloy,1982,57:234.
[4] NAGODE A,KOSEC L,ULE B.Uni-axial and multi-axial creep behavior of P91-type steel under constant load[J].Engineering failure analysis,2011,18:61.
[5] DOBE F,MILI(ˇoverC)KA K.On the Monkman-grant relation for small punch test data[J].Materials science and engineering A,2002,336:245.
[6] RODRIGUEZ C,ARENCON D,BELZUNCE J,et al.Small punch test on the analysis of fracture behaviour of PLA-nanocomposite films[J].Polymer testing,2014(33):21.
[7] LORENZO M,CUESTA I I,ALEGRE J M.The relationship between the uniaxial creep test and the small punch creep test of the AZ31 magnesium alloy[J].Materials science and engineering A,2014(614):319.
[8] 凌祥,胡若美.R60702锆材小冲孔蠕变特性[J].南京工业大学学报(自然科学版),2009,31(5):1.
[9] SAUCEDO-MUÑOZ M L,KOMAZAKI S I,TAKAHASHI T,et al.Creep property measurement of service-exposed SUS 316 austenitic stainless steel by the small-punch creep-testing technique[J].Journal of materials research,2002,17(8):1945.
[10] ROUSE J P,CORTELLINO F,SUN W,et al.Small punch creep testing:review on modelling and data interpretation[J].Materials science and technology,2013,29(11):1328.
[11] KIM B,LIM B.Local creep evaluation of P92 steel weldment by small punch creep test[J].Acta mechanica solida sinica,2008,21(4):312.
[12] 钱珍梅.小冲孔蠕变试验影响因素分析及应用研究[D].南京:南京工业大学,2005.
[13] DOBE F,BESTERCI M,BALLÓKOVÁ B,et al.Analysis of creep fracture in Al-Al4C3 composite after ECAP[J].Materials science and engineering A,2012,532:567.
[14] 涂善东.高温结构完整性原理[M].北京:科学出版社,2003.
[15] KOMAZAKI S,KATO T,KOHNO Y,et al.Creep property measurements of welded joint of reduced-activation ferritic steel by the small-punch creep test[J].Materials science and engineering A,2009,510/511:229.
[16] SINGH S P,BHATTACHARYA S,SEHGAL D K.Evaluation of high temperature mechanical strength of Cr-Mo grade steel through small punch test technique[J].Engineering failure analysis,2014(39):207.
[17] 师瑞霞.12Cr1MoV钢合金元素作用及基体性质的研究[D].兰州:甘肃工业大学,2001.
[18] ZHAO L,JING H Y,XU L Y,et al.Evaluating of creep property of distinct zones in P92 steel welded joint by small punch creep test[J].Materials and design,2013,47:677.

相似文献/References:

[1]生建文,贺小华,薛吉林,等.含球面凹坑缺陷压力管道的高温蠕变应力分析[J].南京工业大学学报(自然科学版),2010,32(02):46.
 SHENG Jian-wen,HE Xiao-hua,XUE Ji-lin,et al.Creep stress analysis of pressure pipe with spherical pit at high temperature[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2010,32(03):46.
[2]丘泰,A.Mocellin.两种方法制备Al2O3-TiN复合物的蠕变行为[J].南京工业大学学报(自然科学版),2002,24(01):98.[doi:10.3969/j.issn.1671-7627.2002.01.021]
[3]陆晓峰,顾伯勤.基于蠕变的高温法兰连接系统寿命预测方法[J].南京工业大学学报(自然科学版),2002,24(04):14.[doi:10.3969/j.issn.1671-7627.2002.04.003]
[4]周剑秋,张振忠,尹侠,等.纳米晶体材料的本构模型研究进展[J].南京工业大学学报(自然科学版),2006,28(05):105.[doi:10.3969/j.issn.1671-7627.2006.05.023]
 ZHOU Jian-qiu,ZHANG Zheng-zhong,YIN Xia,et al.Review on the constitutive modeling study of nanocrystalline materials[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2006,28(03):105.[doi:10.3969/j.issn.1671-7627.2006.05.023]

备注/Memo

备注/Memo:
收稿日期:2016-01-14
基金项目:国家重点研发计划(2016YFF0203000)
作者简介:郑杨艳(1981—),女,江苏南通人,博士,主要研究方向为高温强度及蠕变寿命预测; 凌祥(联系人),教授,E-mail:xling@njtech.edu.cn.
引用本文:郑杨艳,杨思晟,凌祥,等.服役材料寿命预测的小冲孔蠕变试验研究[J].南京工业大学学报(自然科学版),2017,39(3):11-15..
更新日期/Last Update: 2017-05-31