|本期目录/Table of Contents|

[1]李晓龙,刘伟庆,方海,等.格构腹板增强复合材料泡沫夹芯板侧压性能试验与分析[J].南京工业大学学报(自然科学版),2017,39(02):64-69.[doi:10.3969/j.issn.1671-7627.2017.02.011]
 LI Xiaolong,LIU Weiqing,FANG Hai,et al.Edgewise compressive test and analysis for lattice web reinforced composite sandwich panels with foam core[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2017,39(02):64-69.[doi:10.3969/j.issn.1671-7627.2017.02.011]
点击复制

格构腹板增强复合材料泡沫夹芯板侧压性能试验与分析()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
39
期数:
2017年02期
页码:
64-69
栏目:
出版日期:
2017-03-20

文章信息/Info

Title:
Edgewise compressive test and analysis for lattice web reinforced composite sandwich panels with foam core
文章编号:
1671-7627(2017)02-0064-06
作者:
李晓龙刘伟庆方海史慧媛
南京工业大学 土木工程学院,江苏 南京 211800
Author(s):
LI XiaolongLIU WeiqingFANG HaiSHI Huiyuan
College of Civil Engineering,Nanjing Tech University,Nanjing 211800,China
关键词:
夹层板 格构腹板 泡沫夹芯 侧压试验
Keywords:
sandwich panel lattice web foam core edgewise compressive test
分类号:
TB332
DOI:
10.3969/j.issn.1671-7627.2017.02.011
文献标志码:
A
摘要:
提出一种以聚氨酯泡沫为芯材、玻璃纤维增强复合材料为面层和格构腹板的新型复合材料夹层结构板材。采用真空导入工艺制备8个参数不同的夹芯板试件,并对其进行侧压性能试验,探讨格构腹板和聚氨酯泡沫等参数对构件压缩破坏形态和承载性能的影响,并根据复合材料力学理论进行理论分析。结果表明:格构腹板可提高夹芯板的截面刚度,并能有效提升芯材与面层的界面粘结强度,抑制夹芯板面层剥离; 聚氨酯泡沫芯材能有效抑制板材在加载初期的局部屈曲; 理论分析与试验结果相吻合。
Abstract:
A new composite sandwich panel made up of composite materials face sheets and lattice webs and polyurethane foam core was proposed.Eight specimens with different parameters were prepared via vacuum infusion process,and were then tested under edgewise compressive test in order to investigate the effects of different parameters such as lattice webs and polyurethane foam on compressive failure modes and load-carrying properties.Then mechanics of composite materials was used to do some theoretical analysis.The results indicated that lattice webs enhanced the cross-section stiffness of sandwich panels,effectively improved interface bonding strength of foam core and face sheets and restrained the delamination of face sheets.The polyurethane foam core effectively inhibited the local buckling of face sheets during the early stage of loading.Furthermore,theoretical analysis were agreed well with test results.

参考文献/References:

[1] 方海,刘伟庆,陆伟东,等.泡桐木夹层结构材料的力学性能[J].南京工业大学学报(自然科学版),2011,33(5):7.
[2] SATASIVAM S,BAI Y,ZHAO X L.Adhesively bonded modular GFRP web-flange sandwich for building floor construction [J].Composite structures,2014,111:381.
[3] ZHANG F B,LIU W Q,WANG L,et al.Flexural behavior of hybrid composite beams with a bamboo layer and lattice ribs [J].Journal of reinforced plastics & composites,2015,34(7):521.
[4] 刘杰,郝巍,孟江燕.蜂窝夹层结构复合材料应用研究进展[J].宇航材料工艺,2013(3):25.
[5] 张富宾,刘伟庆,齐玉军,等.腹板对复合材料夹层梁抗扭性能影响分析[J].南京工业大学学报(自然科学版),2015,37(1):70.
[6] 周祝林.碳纤维复合材料蜂窝夹层结构侧压强度理论计算[J].纤维复合材料,2001,17(2):24.
[7] 施冬,刘伟庆,齐玉军.新型轻木-GFRP夹芯板拉挤成型工艺及其界面性能[J].复合材料学报,2014,31(6):1428.
[8] MANALO A C,ARAVINTHAN T,KARUNASENA W.Flexural behaviour of glue-laminated fibre composite sandwich beams[J].Composite structures,2010,92(11):2703.
[9] 郑锡涛,孙秦,李野,等.全厚度缝合复合材料泡沫芯夹层结构力学性能研究与损伤容限评定[J].复合材料学报,2006,23(6):29.
[10] 党旭丹,肖军,李勇.X-cor夹层结构复合材料力学性能实验研究进展[J].材料工程,2008(6):76.
[11] WANG L,LIU W Q,WAN L,et al.Mechanical performance of foam-filled lattice composite panels in four-point bending:Experimental investigation and analytical modeling [J].Composites part B:engineering,2014,67:270.
[12] WU Z M,LIU W Q,WANG L,et al.Theoretical and experimental study of foam-filled lattice composite panels under quasi-static compression loading [J].Composites part B:engineering,2014,60:329.
[13] 中华人民共和国国家质量监督检验检验总局.纤维增强塑料拉伸性能试验方法:GB/T 1447—2005[S].北京:中国标准出版社,2005.
[14] 中华人民共和国国家质量监督检验检验总局.纤维增强塑料纵横剪切试验方法:GB/T 3355—2005[S].北京:中国标准出版社,2005.
[15] 中华人民共和国国家质量监督检验检疫总局.夹层结构或芯子平压性能试验方法:GB/T 1453—2005[S].北京:中国标准出版社,2005.
[16] 中华人民共和国国家质量监督检验检疫总局.夹层结构侧压性能试验方法:GB/T 1454—2005[S].北京:中国标准出版社,2005.
[17] WANG L,LIU W Q,FANG H,et al.Behavior of sandwich wall panels with GFRP face sheets and a foam-GFRP web core loaded under four-point bending [J].Journal of composite materials,2015,49(22):2765.
[18] 中国科学院北京力学研究所固体力学研究室板壳组.夹层板壳的弯曲稳定和振动[M].北京:科学出版社,1977.

相似文献/References:

[1]祝露,刘伟庆,方海,等.腹板增强复合材料夹层板低速冲击试验与有限元分析[J].南京工业大学学报(自然科学版),2017,39(05):126.[doi:10.3969/j.issn.1671-7627.2017.05.020]
 ZHU Lu,LIU Weiqing,FANG Hai,et al.Experiment and finite element analysis of lattice reinforced composite sandwich panels subjected to low-velocity impact[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2017,39(02):126.[doi:10.3969/j.issn.1671-7627.2017.05.020]
[2]夏益炜,张晨浩,刘伟庆,等.温度作用下复合材料夹芯墙板的冲击试验[J].南京工业大学学报(自然科学版),2017,39(05):133.[doi:10.3969/j.issn.1671-7627.2017.05.021]
 XIA Yiwei,ZHANG Chenhao,LIU Weiqing,et al.Impact behaviors of sandwich wall panels at elevated temperatures[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2017,39(02):133.[doi:10.3969/j.issn.1671-7627.2017.05.021]

备注/Memo

备注/Memo:
收稿日期:2015-12-28
基金项目:国家自然科学基金(51238003,51578285)
作者简介:李晓龙(1991—),男,江苏南通人,硕士,主要研究方向为复合结构材料; 刘伟庆(联系人),教授,E-mail:wqliu@njtech.edu.cn.
引用本文:李晓龙,刘伟庆,方海,等.格构腹板增强复合材料泡沫夹芯板侧压性能试验与分析[J].南京工业大学学报(自然科学版),2017,39(2):64-69..
更新日期/Last Update: 2017-03-20