|本期目录/Table of Contents|

[1]朱波,周叮,刘伟庆.芯材增强对夹层圆柱壳屈曲性能的影响[J].南京工业大学学报(自然科学版),2011,33(05):100-104.[doi:10.3969/j.issn.1671-7627.2011.05.020]
 ZHU Bo,ZHOU Ding,LIU Weiqing.Effects of reinforcement on buckling of composite cylindrical shells[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2011,33(05):100-104.[doi:10.3969/j.issn.1671-7627.2011.05.020]
点击复制

芯材增强对夹层圆柱壳屈曲性能的影响()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
33
期数:
2011年05期
页码:
100-104
栏目:
出版日期:
2011-09-20

文章信息/Info

Title:
Effects of reinforcement on buckling of composite cylindrical shells
文章编号:
1671-7627(2011)05-0100-05
作者:
朱波周叮刘伟庆
南京工业大学 土木工程学院,江苏南京210009
Author(s):
ZHU BoZHOU DingLIU Weiqing
College of Civil Engineering,Nanjing University of Technology,Nanjing 210009,China
关键词:
复合材料圆柱壳树脂增强有限元屈曲
Keywords:
composite material cylindrical shells resinic reinforcement finite element buckling
分类号:
TB330.1
DOI:
10.3969/j.issn.1671-7627.2011.05.020
文献标志码:
A
摘要:
应用有限元软件ANSYS,将表层和芯层的增强材料与芯材分开,采用8节点SOLID45实体单元,对增强型夹层圆柱壳建立物理模型,计算结构弹性屈曲的临界载荷。分析树脂量对提高点阵式及齿槽式增强圆柱壳轴向稳定性的作用,考察树脂材性、尺寸及分布等参数对屈曲载荷的影响,并将2种增强方式进行对比。结果显示:树脂柱以及树脂齿槽均可提高圆柱壳的抗屈曲性能,其中树脂材性对圆柱壳屈曲载荷的影响有限,而树脂柱和齿槽的疏密程度对圆柱壳的轴向承载能力有着明显的改进作用。总体上,齿槽式的增强效果比点阵式增强效果要好。

Abstract:
Separating the panel and resin from the foam in the core layer,a physical model was developed for the elasticity analysis of reinforced sandwich cylindrical shells by finite element software ANSYS.The SOLID45 elements were used to calculate the buckling loads of the structures.The effects of material properties,sizes and distributions of the resins on the axial stability of composite cylindrical shells reinforced by resinic columns and notches were studied.The comparison of the reinforcement forms was given.Results showed that both the resinic columns and the resinic notches could improve the buckling property of the sandwich cylindrical shells.The influence of resinic modulus on the buckling loads of the composite cylindrical shells was smallerer, however, the effect of the resinic distribution was considerable.The Effect of using the notch reinforcement was better than that of using the column reinforcement.

参考文献/References:

[1]Timoshenko S P.Theory of elastic stability[M].2nd ed.New York:McGrawHill Book Company,1961.
[2]Brush D O,Almroth B O.Buckling of bars,plates and shells [M].New York:McGrawHill Book Company,1975.
[3]Soldators K P.Nonlinear analysis of transverse shear deformable laminated composite cylindrical shells [J].ASME Journal of Pressure Vessel Technology,1992,114:105-109.
[4]Anastasiadis S J,Tabiei A,Simitses G J.Instability of moderately thick,laminated,cylindrical shells under combined axial compression and pressure[J].Composite Structures,1994,27:367-378.
[5]Tabiei A,Simitses G J.Buckling of moderately thick,laminated cylindrical shells under torsion [J].AIAA J,1994,32(3):639-647.
[6]况祺,夏凌辉,常春伟.ANSYS在复合材料夹层结构屈曲分析中的应用[J].科学技术与工程,2005,32(5):1836-1838.
[7]石建军,吴东辉,迟波,等.Shell91单元在复合材料蜂窝夹层结构分析中的应用[J].纤维复合材料,2006(3):40-42.
[8]李涛,樊庆文.ANSYS在复合材料应力分析中的应用[J].机械,2006,33(12):47-48.
[9]廖原.ANSYS在复合材料梁设计中的应用[J].广东建材,2007(12):96-98.
[10]Zhang Shaohui,Chen Hualing.A study on the damping characteristics of laminated composites with integral viscoelastic layers[J].Composite Structures,2006,74(1):63-69.
[11]Barbero E J,Lonetti P,Sikkil K K.Finite element continuum damage modeling of plain weave reinforced composites[J].Composites Part B:Engineering,2005,37(2/3):131-147.
[12]姚秀冬,周叮,刘伟庆.复合材料夹层板芯层内树脂柱对性能的影响[J].材料科学与工程学报,2009,27(6):937-941.

相似文献/References:

[1]王晓东,朱辅华,黄培.聚酰亚胺聚四氟乙烯复合材料的制备和表征[J].南京工业大学学报(自然科学版),2011,33(04):16.[doi:10.3969/j.issn.1671-7627.2011.04.004]
 WANG Xiaodong,ZHU Fuhua,HUANG Pei.Preparation and characterization of PI-PTFE compsite materials[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2011,33(05):16.[doi:10.3969/j.issn.1671-7627.2011.04.004]
[2]李传江,顾伯勤,黄星路.横向压缩载荷下短纤维复合材料细观力学分析[J].南京工业大学学报(自然科学版),2012,34(02):120.[doi:doi:10.3969/j.issn.1671-7627.2012.02.025]
 LI Chuanjiang,GU Boqin,HUANG Xinglu.Micromechanics analysis of short fiber-reinforced composites under transverse compressive loads[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2012,34(05):120.[doi:doi:10.3969/j.issn.1671-7627.2012.02.025]
[3]崔运国,陆春华,张军,等.纳米SiO2/PMMA复合材料的光学性能[J].南京工业大学学报(自然科学版),2012,34(04):101.[doi:10.3969/j.issn.1671-7627.2012.04.020]
 CUI Yunguo,LU Chunhua,ZHANG Jun,et al.Optical properties of nano-SiO2/PMMA composite material[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2012,34(05):101.[doi:10.3969/j.issn.1671-7627.2012.04.020]
[4]宋艳江,章刚,朱鹏,等.玻璃纤维改性热塑性聚酰亚胺复合材料弯曲性能 (Ⅰ)——热处理工艺影响[J].南京工业大学学报(自然科学版),2008,30(02):15.[doi:10.3969/j.issn.1671-7627.2008.02.004]
 SONG Yan-jiang,ZHANG Gang,ZHU Peng,et al.Bending strength of TPI GF composites (Ⅰ) -influence of heat treatment[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2008,30(05):15.[doi:10.3969/j.issn.1671-7627.2008.02.004]
[5]徐洁,盛绪敏.陶瓷基质—SiC晶须复合材料[J].南京工业大学学报(自然科学版),1990,12(04):81.
 Xu Jie Sheng Xumin(Department of Silicate Engineering).CERAMIC MATRIX-SiC WHISKER COMPOSITES[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),1990,12(05):81.
[6]邢志祥,钱惠林.圆柱壳开孔应力集中问题的边界元解法[J].南京工业大学学报(自然科学版),1993,15(01):34.
 Xing Zhixian Qian Huilin (Department of Chemical Machinery).THE BEM OF STRESS CONCENTRATION PROBLEM AT A HOLE OF CYLINDRICAL SHELL[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),1993,15(05):34.
[7]程可,马功勋.纤维增强复合梁Ⅰ型裂纹尖端凝合区模型[J].南京工业大学学报(自然科学版),1998,20(04):94.
 Cheng Ke Ma Gongxun Department of Mechanical Engineering,Nanjing University of Chemical Technology,Nanjing0009,et al.MODEL FOR COHESIVE ZONE OF TOP OF TYPE Ⅰ CRACK IN FIBRE REINFORCED COMPOSITE BEAM[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),1998,20(05):94.
[8]王志远,沈 旭,俞 娟,等.纳米炭黑/聚酰亚胺复合材料在不同工况条件下的摩擦磨损性能[J].南京工业大学学报(自然科学版),2015,37(02):18.
 WANG ZhiyuanSHEN XuYU JuanGU HepingWANG XiaodongHUANG Pei.Friction and wear performance of nanometer carbon black/polyimide composite material on different working conditions[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2015,37(05):18.
[9]张富宾,刘伟庆,齐玉军,等.腹板对复合材料夹层梁抗扭性能影响分析[J].南京工业大学学报(自然科学版),2015,37(01):70.[doi:10.3969/j.issn.1671-7627.2015.01.013]
 ZHANG Fubin,LIU Weiqing,QI Yujun,et al.Torsion analysis on composite sandwich beams with web configurations[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2015,37(05):70.[doi:10.3969/j.issn.1671-7627.2015.01.013]
[10]陈立立,顾伯勤,张斌,等.芳纶纤维表面涂层制备及其黏弹性表征[J].南京工业大学学报(自然科学版),2016,38(03):19.[doi:10.3969/j.issn.1671-7627.2016.03.004]
 CHEN Lili,GU Boqin,ZHANG Bin,et al.Preparation and viscoelasticity characterization of aramid fiber with surface coating[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2016,38(05):19.[doi:10.3969/j.issn.1671-7627.2016.03.004]

备注/Memo

备注/Memo:
收稿日期:2011-03-28
基金项目:国家自然科学基金资助项目(50978134)
作者简介:朱波(1985—),男,江苏扬州人,硕士,主要研究方向为新型复合材料;周叮(联系人),教授,Email:dingzhou57@yahoo.com.
更新日期/Last Update: