|本期目录/Table of Contents|

[1]陆依,韦玲,张荣,等.氢气泡模板法表面改性Sm0.5Sr0.5CoO3的光热转换效率[J].南京工业大学学报(自然科学版),2018,40(01):1-7.[doi:10.3969/j.issn.1671-7627.2018.01.001]
 LU Yi,WEI Ling,ZHANG Rong,et al.Effects of hydrogen bubble on solar thermal conversion efficiency of Sm0.5Sr0.5CoO3 prepared via electrodeposition[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2018,40(01):1-7.[doi:10.3969/j.issn.1671-7627.2018.01.001]
点击复制

氢气泡模板法表面改性Sm0.5Sr0.5CoO3的光热转换效率()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
40
期数:
2018年01期
页码:
1-7
栏目:
出版日期:
2018-01-20

文章信息/Info

Title:
Effects of hydrogen bubble on solar thermal conversion efficiency of Sm0.5Sr0.5CoO3 prepared via electrodeposition
文章编号:
1671-7627(2018)01-0001-07
作者:
陆依12韦玲12张荣12陆春华12倪亚茹12许仲梓12
1.南京工业大学 材料科学与工程学院 材料化学工程国家重点实验室,江苏 南京 210009; 2.江苏先进无机功能复合材料协同创新中心,江苏 南京 210009
Author(s):
LU Yi12WEI Ling12ZHANG Rong12LU Chunhua12NI Yaru123XU Zhongzi12
1.State Key Laboratory of Materials-Oriented Chemical Engineering, College of Materials Science and Engineering,Nanjing Tech University,Nanjing 210009,China; 2.Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites,Nanjing 210009,China
关键词:
氢气模板法 光学性能 Sm0.5Sr0.5CoO3 CuO
Keywords:
hydrogen evolution templates optical properties Sm0.5Sr0.5CoO3 CuO
分类号:
TQ174
DOI:
10.3969/j.issn.1671-7627.2018.01.001
文献标志码:
A
摘要:
采用电化学沉积氢气泡模板法制备具有表面结构的Sm0.5Sr0.5CoO3(SSC5)陶瓷材料。通过调节电解液浓度、电化学沉积时间及沉积次数,改变Sm0.5Sr0.5CoO3复合氧化物的表面结构、形貌及反射光谱性能。结果表明:利用电化学沉积氢气泡模板法可以成功制备CuO-SSC5复合氧化物。在沉积电流密度为0.076 A/cm2的工艺参数下制备的复合氧化物比未表面修饰陶瓷的具有更好的光热效率(67%)。
Abstract:
Hydrogen evolution reaction was intensified to produce bubbles as dynamic templates for the preparation of foamed porous copper on Sm0.5Sr0.5CoO3(SSC5)ceramic in acidic cupric electrolyte.The components,morphologies and spectral properties were investigated by adjusting the frequency of deposition,deposition time,the concentration of electrolytic solution and current density.Results showed that CuO-SSC5 composite could be prepared successfully through chemical deposition.Interestingly,the samples prepared at 0.076 A/cm2 for different deposition times had better solar thermal conversion efficiency(67%)than that of unmodified SSC5.

参考文献/References:

[1] 张鹤飞.太阳能的热利用原理与计算机模拟[M].西安:西北工业大学出版社,2007:3.
[2] WEINSTEIN L A,LOOMIS J,BHATIA B,et al.Concentrating solar power[J].Chemical reviews,2015,115(23):12797.
[3] SELVAKUMAR N,KRUPANIDHI S B,BARSHILIA H C.Carbon nanotube-based tandem absorber with tunable spectral selectivity:transition from near-perfect blackbody absorber to solar selective absorber[J].Advanced materials,2014,26:2552.
[4] AGRAFIOTIS C C,MAVROIDIS I,KOSTANDOPOULOS A G,et al.Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation[J].Solar energy materials and solar cells,2007,91:474.
[5] SANI E,MERCATELLI L,SANSONI P,et al.Spectrally selective ultra-high temperature ceramic absorbers for high-temperature solar plants[J].Journal of renewable sustainable energy,2012,4:033104.
[6] SCITI D,SILVESTRONI L,MERCATELLI L,et al.Suitability of ultra-refractory diboride ceramics as absorbers for solar energy applications[J].Solar energy materials and solar cells,2013,109:8.
[7] SCITI D,SILVESTRONI L,SANS J L,et al.Tantalum diboride-based ceramics for bulk solar absorbers[J].Solar energy materials and solar cells,2014,130:208.
[8] JUNG K H,CHOI S M,PARK H H,et al.High temperature thermoelectric properties of Sr and Fe doped SmCoO3 perovskite structure[J].Current applied physics,2011,11:S260.
[9] MEZIANI D,REZIGA A,REKHILA G,et al.Hydrogen evolution under visible light over LaCoO3 prepared by chemical route[J].Energy conversion management,2014,82:244.
[10] SWIERCZEK K.Physico-chemical properties of Ln0.5A0.5Co0.5Fe0.5O3-δ(Ln:La,Sm; A:Sr,Ba)cathode materials and their performance in electrolyte-supported intermediate temperature solid oxide fuel cell[J].Journal of power sources,2011,196:7110.
[11] DONG F F,CHEN D J,RAN R,et al.A comparative study of Sm0.5Sr0.5MO3-δ(M=Co and Mn)as oxygen reduction electrodes for solid oxide fuel cells[J],International journal of hydrogen energy,2012,37:4377.
[12] LASHTABEG A,SKINNER S J.Solid oxide fuel cells-a challenge for materials chemists[J].Journal of materials chemistry,2006,16:3161.
[13] GUO Y M,CHEN D J,SHI H G,ET A L.Effect of Sm3+ content on the properties and electrochemical performance of SmxSr1-xCoO3(0.2≤x≤0.8)as an oxygen reduction electrodes on doped ceria electrolytes[J].Electrochimica acta,2011,56:2870.
[14] CHEN L,LU C H,FANG Z G,et al.Variable infrared emittance of Sr-incorporated Sm1-xSrxCoO3(0.1≤x≤0.9)[J].Journal of physics D:applied physics,2013,46:105302.
[15] FANG Z G,LU C H,CHEN L,et al.Oxygen atmosphere annealing treatment of Sm0.5Sr0.5CoO3-δ for spectrally selective absorbing applications[J].Materials letters,2013,113:122.
[16] KANETAKE N,KOBASHI M.Innovative processing of porous and cellular materials by chemical reaction[J].Scripta materialia,2006,54(4):521.
[17] SUK J D,KIM D Y,KIM D W,et al.Electrodeposited 3D porous silicon/copper films with excellent stability and high rate performance for lithium-ion batteries[J].Journal of materials chemistry A,2014,2:2478.
[18] 张秋利,兰新哲,宋永辉.电沉积法制备泡沫镍的研究[J].有色金属(冶炼部分),2007(5):40.
[19] MATTAROZZI L,CATTARIN S,COMISSO N,et al.Hydrogen evolution assisted electrodeposition of porous Cu-Ni alloy electrodes and their use for nitrate reduction in alkali[J].Electrochimica acta,2014,140:337.
[20] LI S H,FURBERG R,TOPRAK M S,et al.Nature-inspired boiling enhancement by novel nanostructured macroporous surfaces[J].Advanced functional materials,2008,18:2215.
[21] NAJDOVSKI I,O’MULLANE A P.The effect of electrode material on the electrochemical formationof porous copper surfaces using hydrogen bubble templating[J].Journal of electroanalytical chemistry,2014,722/723:95.
[22] ZHANG Y Q,XIA X H,WANG X L,et al.Three-dimensional porous nano-Ni supported silicon composite film for high-performance lithium-ion batteries[J].Journal of power sources,2012,213:106.
[23] NIKOLIC N D,BRANKOVIC G,PAVLOVIc M G,et al.The effect of hydrogen co-deposition on the morphology of copper electrodeposits II Correlation between the properties of electrolytic solutions and the quantity of evolved hydrogen[J].Journal of electroanalytical chemistry,2008,621(1):13.
[24] LI Y,JIA W,SONG Y,et al.Superhydrophobicity of 3D porous copper films prepared using the hydrogen bubble dynamic template[J].Chemistry of materials,2007,19(23):5758.

相似文献/References:

[1]杨玮民,王丽熙,陆孝驰,等.ZnO量子点/环氧树脂复合材料的制备及其光学性能[J].南京工业大学学报(自然科学版),2015,37(06):1.[doi:10.3969/j.issn.1671-7627.2015.06.001]
 YANG Weimin,WANG Lixi,LU Xiaochi,et al.Preparation and optical properties of ZnO quantum dots/epoxy composite materials[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2015,37(01):1.[doi:10.3969/j.issn.1671-7627.2015.06.001]
[2]房正刚,韦玲,马德林,等.MoO3掺杂Sm0.5Sr0.5CoO3-δ陶瓷的光学性能[J].南京工业大学学报(自然科学版),2017,39(04):13.[doi:10.3969/j.issn.1671-7627.2017.04.003]
 FANG Zhenggang,WEI Ling,MA Delin,et al.Optical properties of MoO3-doped Sm0.5Sr0.5CoO3-δ ceramics[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2017,39(01):13.[doi:10.3969/j.issn.1671-7627.2017.04.003]

备注/Memo

备注/Memo:
收稿日期:2016-06-01
基金项目:江苏省高校优势学科建设工程(PAPD); 江苏省六大人才高峰项目(XCL-029)
作者简介:陆依(1990—),女,江苏宿迁人,博士生,主要研究方向为光热功能材料; 陆春华(联系人),教授,E-mail:chhlu@njtech.edu.cn.
引用本文:陆依,韦玲,张荣,等.氢气泡模板法表面改性Sm0.5Sr0.5CoO3的光热转换效率[J].南京工业大学学报(自然科学版),2018,40(1):1-7..
更新日期/Last Update: 2018-01-18