|本期目录/Table of Contents|

[1]凌志彬,刘伟庆,杨会峰.胶合木植筋节点黏结锚固可靠度分析与设计建议[J].南京工业大学学报(自然科学版),2016,38(05):1-6.[doi:10.3969/j.issn.1671-7627.2016.05.001]
 LING Zhibin,LIU Weiqing,YANG Huifeng.Reliability analysis and design recommendations on bond-anchorage of glulam joints with glued-in rod[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2016,38(05):1-6.[doi:10.3969/j.issn.1671-7627.2016.05.001]
点击复制

胶合木植筋节点黏结锚固可靠度分析与设计建议()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
38
期数:
2016年05期
页码:
1-6
栏目:
出版日期:
2016-09-28

文章信息/Info

Title:
Reliability analysis and design recommendations on bond-anchorage of glulam joints with glued-in rod
文章编号:
1671-7627(2016)05-0001-06
作者:
凌志彬1刘伟庆2杨会峰2
1.苏州科技大学 土木工程学院,江苏 苏州 215011; 2.南京工业大学 土木工程学院,江苏 南京 211800
Author(s):
LING Zhibin1LIU Weiqing2YANG Huifeng2
1.School of Civil Engineering,Suzhou University of Science and Technology,Suzhou 215011,China; 2.College of Civil Engineering,Nanjing Tech University,Nanjing 211800,China
关键词:
胶合木 植筋 可靠度 设计建议
Keywords:
glulam glued-in rod reliability design recommendation
分类号:
TU366.3
DOI:
10.3969/j.issn.1671-7627.2016.05.001
文献标志码:
A
摘要:
在胶合木植筋节点拉拔试验研究的基础上,建立了胶合木植筋锚固极限状态方程。对胶合木植筋试件的黏结锚固强度、植筋屈服强度、试件的几何尺寸、计算模式的准确性等参数进行回归统计分析。采用一次二阶矩法(中心点法)对胶合木植筋节点黏结锚固性能进行了可靠度分析,得到了针对不同种类植筋的锚固长度的可靠度解,并提出了植筋锚固长度的抗震设计建议,为木结构植筋技术的推广应用提供了参考依据。
Abstract:
The limit state equation for the bond-anchorage of glued-in rod in glulam was established based on the pull-out tests of glued-in rod glulam joints.Regression statistical analysis was conducted on several parameters including bond-anchorage strength,yielding strength of glued-in rod,specimen geometrical dimensions and the accuracy of the calculation model.Bond-anchorage reliability assessment of the bond-anchorage behavior of glued-in rod glulam joints was carried out by the First Order Second Moment method(Center-point Method).As a result, the anchorage length reliability solution was obtained for different types of glued-in rod, in the meantime, the seismic design recommendation was also proposed,which provide references for the application of glued-in rod technique in timber engineering.

参考文献/References:

[1] 熊学玉,许立新,胡家智.化学植筋的拉拔试验研究[J].建筑技术,2000,31(6):383.
[2] 赵更歧.植筋黏结锚固性能的试验研究[D].郑州:郑州大学,2001.
[3] 刘向华.植筋黏结锚固性能的试验研究及可靠度分析[D].合肥:合肥工业大学,2004.
[4] 张建荣.多重介质间的黏结机理及植筋锚固受力性能的研究[D].上海:同济大学,2003.
[5] 阎锋,张惠英.在钢筋混凝土基材上植筋的拉拔试验研究[J].建筑技术,2003,34(6):442.
[6] 欧阳坚.混凝土加层框架节点抗震及建筑结构胶植筋的试验研究[D].南京:东南大学,2001.
[7] COOK R A.Behavior of chemically bonded anchors[J].Journal of structural engineering,1993,119(9):2744.
[8] MAZILIGÜNEY L.Tensile behavior of chemically bonded post-installed anchors in low strength reinforced concretes[D].Ankara:Middle East Technical University,2007.
[9] 凌志彬,杨会峰,刘伟庆,等.胶合木植筋黏结锚固性能试验研究[J].建筑结构学报,2013,34(9):132.
[10] 聂玉静.胶合木植筋抗拔性能研究[D].北京:中国林业科学研究院,2012.
[11] 汤举.胶合木结构植筋黏结锚固性能研究[D].南京:南京工业大学,2011.
[12] BROUGHTON J,HUTCHINSON A.Adhesive systems for structural connections in timber[J].International journal of adhesion and adhesives,2001,21(3):177.
[13] BROUGHTION J,HUTCHINSON A.Pull-out behaviour of steel rods bonded into timber[J].Materials and structures,2001,34(2):100.
[14] JENSEN J,KOIZUMI A,SASAKI T,et al.Axially loaded glued-in hardwood dowels[J].Wood science and technology,2001,35(1/2):73.
[15] LORENZIS L D,SCIALPI V,TEGOLA A L.Analytical and experimental study on bonded-in CFRP bars in glulam timber[J].Composites part B:engineering,2005,36(4):279.
[16] STEIGER R,GEHRI E,WIDMANN R.Pull-out strength of axially loaded steel rods bonded in glulam parallel to the grain[J].Materials and structures,2006,40(1):69.
[17] ROSSIGNON A,ESPION B.Experimental assessment of the pull-out strength of single rods bonded in glulam parallel to the grain[J].Holz als roh-und werkstoff,2008,66(6):419.
[18] CHANS OTEROS D,CIMADEVILA ESTÉVEZ J,GUTIÉRREZ MARTÍN E.Strength of joints with epoxy-glued threaded steel rods in tali timber[J].Journal of materials in civil engineering,2010,23(4):453.
[19] YEBOAH D,TAYLOR S,MCPOLIN D,et al.Behaviour of joints with bonded-in steel bars loaded parallel to the grain of timber elements[J].Construction and building materials,2011,25(5):2312.
[20] YEBOAH D,TAYLOR S,MCPOLIN D,et al.Pull-out behaviour of axially loaded basalt fibre reinforced polymer(BFRP)rods bonded perpendicular to the grain of glulam elements[J].Construction and building materials,2013,38:962.
[21] LING Z,YANG H,LIU W,et al.Pull-out strength and bond behaviour of axially loaded rebar glued-in glulam[J].Construction and building aterials,2014,65:440.
[22] British Standards Institution.Eurocode 5:design of timber structures:Part 2:bridges.Final project team draft.Stage 34:prEN1995-2[S].Brussels:European Committee for Standardization,2003.
[23] 凌志彬.胶合木植筋节点黏结锚固与抗震性能研究[D].南京:东南大学,2015.
[24] 中华人民共和国住房和城乡建设部,中华人民共和国国家质量监督检验检疫总局.建筑结构可靠度设计统一标准:GB 50068—2001[S].北京:中国建筑工业出版社,2001.
[25] 倪修国.化学植筋节点在低周反复荷载作用下的抗震性能试验研究[D].合肥:合肥工业大学,2005.

相似文献/References:

[1]汝华伟,刘伟庆,陆伟东,等.胶合木结构螺栓连接耐火极限的试验[J].南京工业大学学报(自然科学版),2011,33(05):70.[doi:10.3969/j.issn.1671-7627.2011.05.014]
 RU Huawei,LIU Weiqing,LU Weidong,et al.Fire resistance experiment on bolted connections in glued laminated timber[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2011,33(05):70.[doi:10.3969/j.issn.1671-7627.2011.05.014]
[2]陆伟东,杨会峰,刘伟庆,等.胶合木结构的发展、应用及展望[J].南京工业大学学报(自然科学版),2011,33(05):105.[doi:10.3969/j.issn.1671-7627.2011.05.021]
 LU Weidong,YANG Huifeng,LIU Weiqing,et al.Development,application and prospects of glulam structures[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2011,33(05):105.[doi:10.3969/j.issn.1671-7627.2011.05.021]
[3]耿启凡,陆伟东.竖嵌FRP层板增强胶合木梁界面应力分析[J].南京工业大学学报(自然科学版),2014,36(01):66.[doi:10.3969/j.issn.1671-7627.2014.01.012]
 GENG Qifan,LU Weidong.Analysis on boud shear stress of glulam beams reinforced with vertical fiber reinforced polymer inlay[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2014,36(05):66.[doi:10.3969/j.issn.1671-7627.2014.01.012]
[4]杨会峰,刘伟庆.FRP增强胶合木梁弯曲变形的解析分析[J].南京工业大学学报(自然科学版),2006,28(03):1.[doi:10.3969/j.issn.1671-7627.2006.03.001]
 YANG Hui-feng,LIU Wei-qing.Analysis study on flexural deflection of FRP reinforced glulam beams[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2006,28(05):1.[doi:10.3969/j.issn.1671-7627.2006.03.001]
[5]毛旻,杨会峰,刘伟庆.胶合木粘钢顺纹拉拔承载力试验研究[J].南京工业大学学报(自然科学版),2018,40(01):114.[doi:10.3969/j.issn.1671-7627.2018.01.018]
 MAO Min,YANG Huifeng,LIU Weiqing.Experimental assessment on the pull-out strength of steel plate bonded in glulam parallel to the grain[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2018,40(05):114.[doi:10.3969/j.issn.1671-7627.2018.01.018]

备注/Memo

备注/Memo:
收稿日期:2016-06-21
基金项目:国家自然科学青年基金(51108233)
作者简介:凌志彬(1987—),男,江西吉安人,讲师,博士,主要研究方向为木结构及其抗震,E-mail:lzb-10410055@163.com.
引用本文:凌志彬,刘伟庆,杨会峰.胶合木植筋节点黏结锚固可靠度分析与设计建议[J].南京工业大学学报(自然科学版),2016,38(5):1-6..
更新日期/Last Update: 2016-09-20