|本期目录/Table of Contents|

[1]郭二廓,洪荣晶,黄筱调,等.数控强力刮齿加工锥齿刀刃形计算[J].南京工业大学学报(自然科学版),2015,37(04):57-62.[doi:10.3969/j.issn.1671-7627.2015.04.011]
 GUO Erkuo,HONG Rongjing,HUANG Xiaodiao,et al.Calculation of tapered skiving tool for power skiving process[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2015,37(04):57-62.[doi:10.3969/j.issn.1671-7627.2015.04.011]
点击复制

数控强力刮齿加工锥齿刀刃形计算()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
37
期数:
2015年04期
页码:
57-62
栏目:
出版日期:
2015-07-09

文章信息/Info

Title:
Calculation of tapered skiving tool for power skiving process
文章编号:
1671-7627(2015)04-0057-06
作者:
郭二廓1洪荣晶12黄筱调12方成刚12
1.南京工业大学 机械与动力工程学院,江苏 南京 211800; 2.江苏省工业装备数字制造及控制技术重点实验室,江苏 南京 211800
Author(s):
GUO Erkuo1HONG Rongjing12HUANG Xiaodiao12FANG Chenggang12
1.College of Mechanical and Power Engineering,Nanjing Tech University,Nanjing 211800,China; 2.Jiangsu Key Laboratory of Digital Manufacturing for Industrial Equipment and Control Technology,Nanjing 211800,China
关键词:
数控加工 强力刮齿 锥齿刮齿刀 刃形计算
Keywords:
numerical control machining power skiving tapered skiving tool blade calculation
分类号:
TH132
DOI:
10.3969/j.issn.1671-7627.2015.04.011
文献标志码:
A
摘要:
针对强力刮齿加工的锥齿刀刀具刃形设计困难的问题,提出了一种用于加工渐开线齿形的锥齿刮齿刀刃形计算方法。根据交错轴空间啮合理论,建立内齿圆柱齿轮强力刮齿加工数学模型,推导并求解啮合方程式,得到刮齿刀齿面方程; 对设计有前角的刮齿刀刃口廓形进行计算,得到锥齿刮齿刀的法面刃口曲线方程; 以一种加工内直齿圆柱齿轮的锥齿刮齿刀为例,通过刮齿刀展成运动包络出的齿形和运动仿真分析,检查刀具规避干涉的能力,验证了该锥齿刮齿刀的计算方法准确可行。
Abstract:
Although the power skiving of gear process has demonstrated an excellent capability in latest research,the key to the successful application of skiving is the design of suitable tools.A method for designing and calculating the skiving tool for machining involute helical gear was proposed.Firstly,according to the principle of power skiving for internal gear,a mathematical model of power skiving for working internal gear was established and the cutter surface was obtained by solving the meshing equations.Then,the profile of cutter with a rake angle was calculated and the normal plane equation of the blade was deduced.Finally,through the generating motion tooth profile and motion simulation of a helical cutter to produce internal spur gears,the capacity of avoiding interference of the cutter was checked and the feasibility of the calculation proposed was testified as well.

参考文献/References:

[1] Stadtfeld H J.Power skiving of cylindrical gears on different machine platforms[J].Gear Technology,2014,31(1):52-62.
[2] Kojima M.Gear skiving of involute internal spur gear(part1:on the tooth profile)[J].Bulletin of the JSME,1974,17(106):511-518.
[3] Spath D,Huhsam A.Skiving for high-performance machining of periodic structures[J].Annals of the CIRP,2002,51(1):472-475.
[4] Volker S,Chirstoph K,Hermann A.3D-FEM modeling of gear skiving to investigate and chip formation mechanisms[J].Advanced Materials Research,2011,223:46-55.
[5] Hartmut M,Olaf V.Robust method for skiving and corresponding apparatus comprising a skiving tool:US,20120328384A1[P].2012-10-27.
[6] Hartmut M,Olaf V.Semi-completing skiving method and device having corresponding skiving tool for executing a semi-completing skiving method:US,20130071197A1[P].2013-03-21.
[7] 李佳,陈新春,张鸿源.圆柱齿轮剐齿技术[J].机械工程学报,2011,47(19):193-198.
[8] 陈新春,李佳,贺友平.直齿剐齿刀结构设计与计算[J].天津大学学报,2012,45(5):411-416.
[9] Chen X C,Li J,Lou B C.A study on the design of error-free spur slice cutter[J].The International Journal of Advanced Manufacturing Technology,2013,68:727-738.
[10] Chen X C,Li J,Lou B C,et al.Effect of the cutter parameters and machining parameters on the interference in gear slicing[J].Chinese Journal of Mechanical Engineering,2013,26(6):1118-1126.
[11] 吴序堂.齿轮啮合原理[M].2版,西安:西安交通大学出版社,2009.
[12] Litvin F L,Fuentes A.Gear geometry and applied theory[M].New York:Cambridge University Press,2004.

备注/Memo

备注/Memo:
收稿日期:2014-05-09
基金项目:国家自然科学基金(51175242)
作者简介:郭二廓(1986—),男,安徽阜阳人,博士生,主要研究方向为齿轮先进加工制造工艺及其装备; 洪荣晶(联系人),教授,E-mail:hongjmst@sina.com.
引用本文:郭二廓,洪荣晶,黄筱调,等.数控强力刮齿加工锥齿刀刃形计算[J].南京工业大学学报:自然科学版,2015,37(4):57-62..
更新日期/Last Update: 2015-07-08