|本期目录/Table of Contents|

[1]薛洲海,叶燕华,孙锐,等.双板预制混凝土剪力墙中的自密实混凝土模板侧向压力[J].南京工业大学学报(自然科学版),2014,36(03):106-110.[doi:10.3969/j.issn.1671-7627.2014.03.020]
 XUE Zhouhai,YE Yanhua,SUN Rui,et al.Formwork pressure exerted by self-compacting concrete in double-wall precast concrete shear wall structure[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2014,36(03):106-110.[doi:10.3969/j.issn.1671-7627.2014.03.020]
点击复制

双板预制混凝土剪力墙中的自密实混凝土模板侧向压力()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
36
期数:
2014年03期
页码:
106-110
栏目:
出版日期:
2014-05-20

文章信息/Info

Title:
Formwork pressure exerted by self-compacting concrete in double-wall precast concrete shear wall structure
文章编号:
1671-7627(2014)03-0106-05
作者:
薛洲海1叶燕华12孙锐13殷婉清1
1.南京工业大学 土木工程学院,江苏 南京 211800; 2.江苏省绿色建筑工程技术研究中心,江苏 南京 210009; 3.中航天建设工程有限公司,北京 100070
Author(s):
XUE Zhouhai1YE Yanhua12SUN Rui13YIN Wanqing1
1.College of Civil Engineering,Nanjing Tech University,Nanjing 211800,China; 2.Jiangsu Green Building Technology Research Center, Nanjing 210009, China; 3.Zhong Hang Tian Construction Engineering Co. Ltd.,Beijing 100070,China
关键词:
自密实混凝土 预制双板剪力墙 浇筑速度 模板长度
Keywords:
self-compacting concrete double-wall precast concrete shear wall structure casting rate formwork section length
分类号:
TU528.53
DOI:
10.3969/j.issn.1671-7627.2014.03.020
文献标志码:
A
摘要:
通过将免振捣的自密实混凝土(SCC)应用到双板预制混凝土(DWPC)剪力墙中,可避免DWPC剪力墙因空腔尺寸较小,采用普通混凝土浇筑时人工振捣较困难,使得预制双板局部开裂、胀模等破坏现象发生。SCC具有高流动性,对模板持续产生较大侧向压力。进行了双板预制剪力墙中SCC模板侧向压力试验研究,分析了混凝土浇筑速度、模板长度等参数对模板侧向压力的影响,实时监测并分析DWPC空腔内浇筑的SCC对模板持续产生的侧向压力。研究结果表明:浇筑速度越快,模板初始侧向压力越大,侧向压力下降时间越长,初始侧向压力值和下降速率与模板长度无关。
Abstract:
Mold expanding usually occurred in double-wall precast concrete(DWPC)shear wall during construction due to improper vibrating,which could be conquered by using self-compacting concrete(SCC)on the wall.SCC has high liquidity which generated continuous lateral pressure on the framework.In this paper, the lateral pressure on the framework, and the influences of casting rate and section length to the formwork pressure were discussed.Real-time monitoring was executed and the testing results were analyzed.Results showed that the faster the casting rate was,the higher pressure the initial formwork had,and the longer time the pressure droped.The initial pressure and the dropping rate had no relation with the formwork section length.

参考文献/References:

[1] 王滋军,刘伟庆,魏威,等.钢筋混凝土水平拼接叠合剪力墙抗震性能研究[J].建筑结构学报,2012,33(7):147-155.
[2] Ovarlez G,Roussel N.A physical model for the prediction of lateral stress exerted by self-compacting concrete on formwork[J].Materials and Structures,2006,39:269-279.
[3] Seung H K,Shah S P,Phung Q T,et al.Intrinsic model to predict formwork pressure[J].ACI Materials Journal,2010,107:20-26.
[4] 朱铁梅,叶燕华,魏威,等.自密实混凝土模板侧向压力初探[J].混凝土,2011(7):7-9.
[5] Assaad J,Khayat K H.Effect of casting rate and concrete temperature on formwork pressure of self-consolidating concrete[J].Materials and Structures,2006,39:333-341.
[6] Caufin B,Papo A.The influence of the hydration process on the rheology of cement pastes[J].Zement Kalk Gips,1984,37(12):656-661.
[7] 张海伟,蔡庆晓,李统.自密实混凝土的研制与工程应用[J].混凝土,2009(11):89-91.
[8] Assaad J,Khayat K H.Variation of forwork pressure with thixotropy of self-consolidating concrete[J].ACI Material Journal,2003,100(1):29-37.
[9] 中华人民共和国住房和城乡建设部.JGJ/T283—2012 自密实混凝土应用技术规程[S].北京:中国建筑工业出版社,2012.
[10] Talesnick M,Katz A.Mearuring lataral pressure of concrete:from casting through hardening[J].Construction and Building Material,2012,34:211-217.
[11] Santilli A,Puente I,Lopez A.Rates of placement discussion for the validation of experimental models of fresh concrete lateral pressure in walls[J].Construction and Building Material,2011,25:227-238.

相似文献/References:

[1]朱国平,叶燕华,陈莉,等.自密实混凝土的力学性能试验[J].南京工业大学学报(自然科学版),2010,32(01):59.
 ZHU Guo ping,YE Yan hua,CHEN Li,et al.Mechanical property experiment of selfcompacting concrete[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2010,32(03):59.
[2]黄晖,叶燕华,韩娟,等.自密实混凝土受弯梁受力性能试验[J].南京工业大学学报(自然科学版),2011,33(01):95.[doi:10.3969/j.issn.1671-7627.2011.01.019]
 HUANG Hui,YE Yanhua,HAN Juan,et al.Flexure bearing property experiment of self-compacting concrete beams[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2011,33(03):95.[doi:10.3969/j.issn.1671-7627.2011.01.019]
[3]孙锐,叶燕华,汪恒,等.自密实混凝土及其在叠合剪力墙中的应用[J].南京工业大学学报(自然科学版),2014,36(02):118.[doi:10.3969/j.issn.1671-7627.2014.02.020]
 SUN Rui,YE Yanhua,WANG Heng,et al.Self-compacting concrete and its application in composite reinforced concrete shear walls[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2014,36(03):118.[doi:10.3969/j.issn.1671-7627.2014.02.020]
[4]陈丽华,叶燕华,缪汉良,等.自密实混凝土工作性能试验[J].南京工业大学学报(自然科学版),2008,30(03):47.[doi:10.3969/j.issn.1671-7627.2008.03.011]
 CHEN Li-hua,YE Yan-hua,MIAO Han-liang,et al.Experiment on workability behavior for self-compacting concrete[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2008,30(03):47.[doi:10.3969/j.issn.1671-7627.2008.03.011]
[5]李炎,叶燕华,张诗浩,等.自密实混凝土正交配合比试验及对工作性能的影响[J].南京工业大学学报(自然科学版),2016,38(03):94.[doi:10.3969/j.issn.1671-7627.2016.03.016]
 LI Yan,YE Yanhua,ZHANG Shihao,et al.Proportion of orthogonal test and its effects on performance of self-compacting concrete[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2016,38(03):94.[doi:10.3969/j.issn.1671-7627.2016.03.016]
[6]宋祥,叶燕华,张诗浩,等.型钢自密实混凝土叠合剪力墙延性性能试验分析[J].南京工业大学学报(自然科学版),2017,39(02):91.[doi:10.3969/j.issn.1671-7627.2017.02.015]
 SONG Xiang,YE Yanhua,ZHANG Shihao,et al.Experiment and analysis on ductility behavior of SCC composite shear walls with profile steel[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2017,39(03):91.[doi:10.3969/j.issn.1671-7627.2017.02.015]

备注/Memo

备注/Memo:
收稿日期:2013-09-14
基金项目:国家自然科学基金(51178218)
作者简介:薛洲海(1989—),男,江苏盐城人,硕士,主要研究方向为混凝土结构; 叶燕华(联系人),教授,E-mail:yyh_5610@163.com..
更新日期/Last Update: 2014-05-20