|本期目录/Table of Contents|

[1]张虎,黄筱调,方成刚,等.砂轮修整误差对数控成形磨齿加工精度的影响[J].南京工业大学学报(自然科学版),2013,35(04):26-32.[doi:10.3969/j.issn.1671-7627.2013.04.006]
 ZHANG Hu,HUANG Xiaodiao,FANG Chenggang,et al.Effects of wheel dressing error on machining accuracy of CNC gear form grinding[J].Journal of NANJING TECH UNIVERSITY(NATURAL SCIENCE EDITION),2013,35(04):26-32.[doi:10.3969/j.issn.1671-7627.2013.04.006]
点击复制

砂轮修整误差对数控成形磨齿加工精度的影响()
分享到:

《南京工业大学学报(自然科学版)》[ISSN:1671-7627/CN:32-1670/N]

卷:
35
期数:
2013年04期
页码:
26-32
栏目:
出版日期:
2013-07-01

文章信息/Info

Title:
Effects of wheel dressing error on machining accuracy of CNC gear form grinding
文章编号:
1671-7627(2013)04-0026-07
作者:
张虎黄筱调方成刚郭二廓
南京工业大学 机械与动力工程学院,江苏 南京 211800
Author(s):
ZHANG HuHUANG XiaodiaoFANG ChenggangGUO Erkuo
College of Mechanical and Power Engineering, Nanjing University of Technology, Nanjing 211800, China
关键词:
砂轮 修整误差 成形磨削 齿轮
Keywords:
wheel dressing error form grinding gear
分类号:
TG616
DOI:
10.3969/j.issn.1671-7627.2013.04.006
文献标志码:
A
摘要:
基于曲面包络理论建立砂轮修整误差影响下的实际砂轮曲面的数学模型,然后求解实际磨削齿面的端面廓形并评价其与设计廓形的偏差,考察各个砂轮修整误差对磨齿精度的影响。在数控成形磨齿机上进行了磨削实验并用三坐标测量仪测量磨削后的齿轮。测量结果显示齿廓精度达到了4级(ISO 1328-1—1997)。
Abstract:
The mathematical model of actual wheel surface with wheel dressing error was built based on surface envelope theory. The actual profile of transverse plane was then solved and its deviation from design profile was evaluated. Finally, the effect of each dressing error on the accuracy of ground gear was analyzed based on the proposed mathematical model. A grinding experiment was implemented using the gear form grinding machine,and the gear was measured by three-coordinate measuring machine. Measurement results indicated that the accuracy of the tooth profile achieves grade 4(ISO 1328-1—1997).

参考文献/References:

[1] Shih Y P,Chen S D.A flank correction methodology for a five-axis CNC gear profile grinding machine[J].Mechanism and Machine Theory,2012,47:31-45.
[2] Karpuschewski B,Knoche H J,Hipke M.Gear finishing by abrasive processes[J].CIRP Annals:Manufacturing Technology,2008,57(2):621-640.
[3] 王立鼎,凌四营,马勇,等.精密、超精密圆柱渐开线齿轮的加工方法[J].光学精密工程,2009,17(2):321-326.
[4] 张希康.成型磨齿机开发的探讨[J].机械制造,2000,38(2):28-31.
[5] 梁锡昌,房丰洲,王序进.成形磨齿及其修整器设计[J].机械传动,1984,8(5):31-33.
[6] 梁锡昌,王序进,王志勇.提高成形磨齿精度的方法[J].重庆大学学报:自然科学版,1984,7(3):8-13.
[7] 肖涤尘,梁锡昌,张济生.螺旋面成形加工误差与补偿[J].重庆大学学报:自然科学版,1990,13(5):7-14.
[8] 张立功,王军,邓效忠.成形法磨削斜齿轮的齿形误差分析[J].机械传动,2009,33(1):73-75.
[9] You H Y,Ye P Q,Wang J S,et al.Design and application of CBN shape grinding wheel for gears[J].International Journal of Machine Tools and Manufacture,2003,43(12):1269-1277.
[10] 吴序堂.齿轮啮合原理[M].2版.西安:西安交通大学出版社,2009.
[11] Litvin F L,Fuentes A.Gear geometry and applied theroy[M].New York:Cambridge University Press,2004.
[12] 徐彦伟.弧齿锥齿轮铣齿机主动精度设计方法研究[D].天津:天津大学,2010.

备注/Memo

备注/Memo:
收稿日期:2012-11-09
基金项目:国家自然科学基金(51175242); 江苏省科技成果转化专项资金(BA2012031)
作者简介:张虎(1986—),男,江苏盐城人,博士生,主要研究方向为数控技术; 黄筱调(联系人),教授,E-mail:njgdhxdzh@163.com..
更新日期/Last Update: 2013-07-07